Our Higher Technical Qualifications provide a wide-ranging study of Engineering and are designed for students who wish to pursue or advance their career in this exciting sector. The department’s facilities will enable you to learn using a wide range of industry equipment. A large, dedicated workshop houses a range of state-of-the-art resources. In our engineering labs you’ll build experience with CAD equipment and software, programmable logic controllers, pneumatic and hydraulic rigs and a range of electronic, robotic and mechatronic facilities.
Engineering and Manufacturing
Higher National Diploma (HND) Engineering (Electrical / Electronic) for England (HTQ) (September 2027 entry)
University
Engineering and Manufacturing
Chippenham
Study Mode
Full Time
Start Date, Location
Sep 2027, Chippenham
Duration
2 years
Cost
£6350.00
per academic year.
View our facilities & work
Course Overview
More information
What will I learn?
Year 1:
– Unit 4002: Engineering Maths
– Unit 4003: Engineering Science
– Unit 4061: Programming for Engineers
– Unit 4062: Professional Engineering Practice
– Unit 4063: Engineering Mechanics and Materials
– Unit 4022: Electronic Circuits and Devices
– Unit 4033: Programmable Logic Controllers
– Unit 4067: Digital Devices and Systems
Year 2:
– Unit 5006: Further Mathematics
– Unit 5013: Embedded Systems
– Unit 5014: Analogue Electronic Systems
– Unit 5041: Engineering Project
– Unit 5042: Signals and Systems
– Unit 5044: Digital Electronic Systems
– Unit 5045: Electrical Engineering and Sustainability
– Unit 5046: Analogue and Digital Communications
The course can also be delivered as a part time course over the duration of four years.
– Unit 4002: Engineering Maths
– Unit 4003: Engineering Science
– Unit 4061: Programming for Engineers
– Unit 4062: Professional Engineering Practice
– Unit 4063: Engineering Mechanics and Materials
– Unit 4022: Electronic Circuits and Devices
– Unit 4033: Programmable Logic Controllers
– Unit 4067: Digital Devices and Systems
Year 2:
– Unit 5006: Further Mathematics
– Unit 5013: Embedded Systems
– Unit 5014: Analogue Electronic Systems
– Unit 5041: Engineering Project
– Unit 5042: Signals and Systems
– Unit 5044: Digital Electronic Systems
– Unit 5045: Electrical Engineering and Sustainability
– Unit 5046: Analogue and Digital Communications
The course can also be delivered as a part time course over the duration of four years.
Entry Requirements
At least 4 GCSEs at grade C (4) or above including English and Maths (or equivalent level 2 qualifications) plus one or more of the following:
– 48 UCAS Tariff Points from an appropriate level 3 vocational programme (e.g. BTEC National Diploma).
– A Level 3 Extended Diploma or GCE AS / A Level or a 6 unit Vocational A Level.
– Success in an Access to Higher Education Diploma.
– Formally assessed outcomes acquired through recognised prior learning or experience.
Applications from mature candidates are welcomed and considered on an individual basis.
Where English is not your first language, an IELTS score of 6.0 or equivalent qualification will normally be required.
Applicants without the qualifications specified will be considered based on their ability to study the subject at the required level.
You may be required to attend an interview and you can apply for this programme through UCAS.
The UCAS institution code for this programme is W74.
The UCAS course code for this programme is DEE1.
– 48 UCAS Tariff Points from an appropriate level 3 vocational programme (e.g. BTEC National Diploma).
– A Level 3 Extended Diploma or GCE AS / A Level or a 6 unit Vocational A Level.
– Success in an Access to Higher Education Diploma.
– Formally assessed outcomes acquired through recognised prior learning or experience.
Applications from mature candidates are welcomed and considered on an individual basis.
Where English is not your first language, an IELTS score of 6.0 or equivalent qualification will normally be required.
Applicants without the qualifications specified will be considered based on their ability to study the subject at the required level.
You may be required to attend an interview and you can apply for this programme through UCAS.
The UCAS institution code for this programme is W74.
The UCAS course code for this programme is DEE1.
Study, Assessment and Qualifications
A Higher National Diploma qualification is equivalent to a level 5 university qualification, for example a foundation degree and usually takes two years to complete in full.
There is continual assessment across the course including written reports, presentations, workshops and a final research project.
During your time on the course, you will be directed to carry out additional reading and other appropriate tasks alongside your time in the classroom and you should expect to spend additional time on your studies.
The course will be a combination of assessments, practical work and exams according to the specs of each unit.
There is continual assessment across the course including written reports, presentations, workshops and a final research project.
During your time on the course, you will be directed to carry out additional reading and other appropriate tasks alongside your time in the classroom and you should expect to spend additional time on your studies.
The course will be a combination of assessments, practical work and exams according to the specs of each unit.
Additional Costs and Information
For some trips or visits, there may be additional charges that apply which you will be made aware of when and if appropriate.
The Office for Students (OfS), the new independent regulator for Higher Education in England, has confirmed that the college is successfully registered as a provider for Higher Education and that students are eligible for funding and student support from Student Finance England. Please visit www.officeforstudents.org.uk for more information.
The Office for Students (OfS), the new independent regulator for Higher Education in England, has confirmed that the college is successfully registered as a provider for Higher Education and that students are eligible for funding and student support from Student Finance England. Please visit www.officeforstudents.org.uk for more information.
Ready to apply?
Careers
Other upcoming events
Chippenham open event: October 2026
06 October 2026
17:00
30 November -0001
0:00
30 November -0001
0:00
30 November -0001
0:00
Trowbridge Student Art Exhibition
11 June 2026
18:00
30 November -0001
0:00
30 November -0001
0:00
30 November -0001
0:00
Chippenham Student Art Exhibition
18 June 2026
18:00
30 November -0001
0:00
30 November -0001
0:00
30 November -0001
0:00
Salisbury Student Art Exhibition
18 June 2026
18:00
30 November -0001
0:00
30 November -0001
0:00
30 November -0001
0:00
Castle Combe Open Event: September 2026
26 September 2026
12:00
30 November -0001
0:00
30 November -0001
0:00
30 November -0001
0:00
Trowbridge open event: September 2026
30 September 2026
17:00
30 November -0001
0:00
30 November -0001
0:00
30 November -0001
0:00
Lackham open event: October 2026
03 October 2026
17:00
30 November -0001
0:00
30 November -0001
0:00
30 November -0001
0:00
Salisbury open event: October 2026
08 October 2026
17:00
30 November -0001
0:00
30 November -0001
0:00
30 November -0001
0:00